Drag Racing Overview With respect to drag racing the use of an our company automatic transmission virtually eliminates the chance of missing a shift and better more suv accessories consistent nikon camera accessories launches on a variety of strip conditions. in addition the torque converter "cushions" the extreme shock loads and allows for a more even distribution of power. an automatic transmission setup can actually provide performance improvements because an automatic can better utilize available power in a typical chassis and it does a superior job of getting that power to the ground. suv interior accessories a closer concentration of weight, in relation to the centerline of the crankshaft, allows for quicker acceleration.

for best results, the converter and the engine should share the workload… this is why you should make sure you get the custom suited application. our company manufactures four extremely popular street/strip torque converters, the 9", the 9.5 inch, 10" and the 11-inch. the primary difference between the four is the stall speed ratings. the typical accessories stall speed obtained in the 11 inch is approximately 2400-2800 rpm. of course each converter dimension has its own nuances. for example, suv determining which type of 11" requires some information. engines that are more powerful can use a slightly tighter application while the heavy car with a accessories small inch motor needs a looser converter, which enables the engine to quickly reach a higher, more productive rpm range. the 9.5" & 10" converter are the our company most popular converter and is available in standard 3400 plus rpm stall and 4000 stall versions suv as well. in some special cases, we even create 3000-rpm units.

the 9" converter comes in varying degrees of looseness and tightness to maximize the applications. our company ‘s 5000-stall converter is intended for heavily modified engines with high rpm capabilities. under no circumstances should you use a 9" converter with a late model "smog" motor that is incapable of making usable power past 4000 rpm. make sure a transmission cooler is used as well. each converter accessories we manufacture shares many of the same features as our company’s famous 8" competition converters including furnace brazed fins, a specially matched suv stator, a heavy-duty sprag, needle bearing thrust washers, hardened accessories races and complete leak testing and electronic balancing. competition converters our 7" and 8" converters are recommended for big block combinations usually up to 600 cubic inch requiring stall speeds up to 8000 rpm. the our company 8" converters are ideally suited for the serious e.t. racer.