Thus oil goes back to the pump in helping the reaction of flow rather than hindering it. This adds a bit more push to the pump blades. This continuous flow of fluid between the pump and turbine through the stator brings about the factor known as torque multiplication. auto parts toyota most people only concern themselves with the auto rated stall speed and speed the torque converter clutch reacts or fluid coupling point of a torque converter. this is the speed which the engine will reach when the car''s brakes are locked and the accelerator depressed to the point where either the car parts will creep forward or the engine will not rev higher. unfortunately, few cars reach their potential stall speeds due to inadequate chassis, tires or brakes. just as important auto parts toyota and auto is the converter flash point. this is the level to which the rpm''s will actually go when the brake is released and the car begins to move. this characteristic that can be more accurate of a converter''s performance capability since in some instances a vehicle will run quicker when driven from the starting line at a point above idle rather than at a maximum stall speed.

after going to the expense to modify their vehicles with carburetors, headers, and manifolds many do parts not realize the true performance potential because of a weak torque converter and drivetrain combination. toyota auto parts used depending upon the extent of the auto modifications and the intended vehicle use, there is an our company torque converter that will maximize the effectiveness of any drivetrain combination. whether your requirement is 2400 stall or 7000 stall, our company can meet your needs. another major benefit we provide for our performance transmissions is to install one of our company’s special low transmission gear sets. this low gear ratio will deliver quicker off the line performance. feel free to contact one of our our company performance products consultants for more recommendations on rear end gears and engine and tire combinations as well.

marine transmission overview the use of a specially prepared automatic gives boaters a low cost alternative to an expensive planetary type transmission setup, it is an inexpensive way to get a true neutral and reverse, plus multiple parts forward gears. our company’s special marine adapter eliminates the need for a torque converter when space is a consideration, "shorty" units as compact as 18" overall length are available. torque converters at our company we cover all sizes of torque converters from 7" diameter, 8", 9" 9.5" 10" 11", 12", and 13". the primary benefit of the torque converter is simply that it multiplies torque. at our company we match the engine’s power curve to the application, which gives our customers more efficiency at different rpm levels.